Affiliate Disclosure：As an Amazon Associate, we may earn commissions from qualifying purchases from Amazon.com. Learn more
Speaking of hula hoops, it is almost a household name.
Many people have memories of hula hoops, and these memories are often accompanied by laughter and fun.
In childhood, the hula hoop is more of a toy, and children enjoy the hula hoop’s happiness while playing.
In the minds of adults, the hula hoop is the simplest and most convenient “weight loss tool”. When many people find that their waist and abdomen are fatter, they think, “Well, maybe I should learn how to hula hoop.”
Maybe you didn’t master how to hula hoop when you were young, but it is still a wise decision to learn how to hula hoop from now on!
When you are proficient in how to hula hoop, you may fall in love with this magic hula hoop.
Although hula hoops are almost rarely seen around now, there was a wave of craze for thin waist by spinning hula hoops.
With the improvement of people’s requirements for fitness, exercise items are becoming more and more critical. Today we will discuss how to hula hoop.
1. Is the hula hoop good exercise? Can it help you lose weight?
On this issue, many opinions are not consistent.
Some people say that they have been spinning the hula hoop for a month or two. They have lost a lot of weight, and their waists have become thinner, and they have become more energetic.
However, some people say that they have been spinning for 30 minutes every day, and after more than a month, they have not seen any weight loss, and their waist circumference has not been reduced. Why is this?
This is because body fat is usually distributed under the skin and around the internal organs. In specific parts, abdominal fat usually has the highest fat storage, followed by buttocks, legs, chest, back, etc. Also, fat loss reduces the whole body together, but it will also show differences according to different genes.
The process of hoarding fat is also different, so it is divided according to the body shape of other obese people, such as pear-shaped body and apple-shaped body.
But fat loss is always the whole body fat loss, but some parts lose weight faster, and some parts lose weight slowly.
Spinning the hula hoop is just one type of aerobic exercise. You can lose weight only because your calorie intake is less than the calorie expended by your body, which has reached a negative calorie value so that you can continue to lose fat and lose weight.
Therefore, if a person only relies on spinning the hula hoop but never controls her diet, her weight loss results may not be ideal. Then she may have doubts: Is the hula hoop a good exercise? Because we all know that the calorie reduction brought about by diet control is very considerable, while the calories consumed by exercise to lose weight are minimal.
No matter what exercise you do, as long as you want to achieve better weight loss, controlling your diet should be the priority.
This is why we can see that many people can spin their hula hoop waist circumference and become thinner. Still, some people can’t achieve the same effect, because everyone has different efforts in eating and drinking.
So, is hula hoop a good exercise? Yes, it is indeed a good exercise, but it is related to the weight of the hula hoop, the frequency of exercises, and diet control.
2. Benefits of Hula Hoop
Benefits of hula hoop #1 – Burn Calories
When you are trying to lose weight, reducing calories is one of the main ways.
In terms of calorie burning, hula hoops are comparable to other aerobic dance activities, such as salsa dancing, swing dancing, and belly dancing.
According to related reports, in 30 minutes of hula hoop training, women can burn an average of 165 calories, while men can burn 200 calories.
Benefits of hula hoop #2 – Fat Reduction in Specific Parts of Body
When you want to lose weight, you may often just be dissatisfied with certain parts of your body, such as the waist, arms, thighs, etc. And spinning the hula hoop can burn fat well, especially the fat in the abdomen, waist, and buttocks.
According to a 2015 study in the United States, this study evaluated 13 women’s hula hoop heavier program within 6 weeks and found that these women’s waist circumference decreased by an average of 3.4 cm, and their hip circumference decreased by an average of 1.4 cm.
Rotating the hula hoop can burn fat in some specific parts of the body, especially the fat in the abdomen, waist, and buttocks, conducive to reducing the waist and hip circumference.
Benefits of hula hoop #3 – Enhance Cardiovascular Health
Practicing hula hoop is a full-body aerobic exercise.
Aerobic exercise can exercise the heart and lungs and improve the flow of oxygen throughout the body. At the same time, it can also reduce the risk of heart disease and diabetes, increase cholesterol levels, improve brain function, and even reduce stress.
When you exercise with a hula hoop, your heart rate will increase, blood flow will improve, and heart health gets enhanced.
Practicing hula hoop is a full-body aerobic exercise, which is good for enhancing cardiovascular health.
Benefits of hula hoop #4 – Strengthen Core Muscles
When spinning the hula hoop, to keep the hula hoop rotating at the waist, you need to control the entire core muscles. It would help if you had strong core muscles and good hip mobility.
The correct use of hula hoop and regular exercises are an excellent way to train the abdominal muscles, gluteal muscles, and oblique muscles.
Benefits of hula hoop #5 – Improve Balance
According to the American Sports Council, any physical activity that requires posture and stability based on support, such as hula hoops, can help maintain and improve balance.
Maintaining a good balance can better control the body’s movement. It also helps to improve posture and facilitates other exercises in the correct form.
Practicing hula hoop requires the body to maintain stability while controlling the rotation, improving the body’s balance ability.
Benefits of hula hoop #6 – Economical, Portable, and Easy to Store
Learning how to hula hoop is a very affordable exercise. Because the price of hula hoops is low. The cost of a classic hula hoop is generally less than $50, and the cost of ahula hoop with special features does not exceed $100, depending on the brand. Compared with hundreds of other fitness tools, the hula hoop is cheap!
The hula hoop is very convenient to store. When not in use, you can lean against the wall and plug it behind the door. It does not take up any space.
Moreover, the modern hula hoop has developed a detachable version, disassembling a hula hoop into several pieces. This detachable hula hoop is also very convenient to assemble, not only better for storage but also conducive to carry around and turn it around anytime and anywhere during business trips and travel.
The above are the six benefits of hula hoop after an overview! The benefits of hula hoop can provide you with a specific basis for evaluating this simple fitness equipment.
3. Learn how to prepare for hula hoop
Before you start learning how to hula hoop, you need to do some simple preparations. This will help you achieve better success.
1) Choose the right clothes
Please try to choose clothes that are soft and elastic. Tight-fitting clothes will help you increase your flexibility. Because when learning how to hula hoop, too loose clothes will hinder the movement of the hula hoop. It’s not a wise decision to practice wearing loose clothing until you have mastered how to hula hoop.
2) Choose the right hula hoop? This is very important for how to hula hoop
Before learning how to hula hoop, it is essential to choose a hula hoop that suits you.
How to choose the right size of the hula hoop?
The success of the exercise has a lot to do with the size of the chosen hula hoop.
Stand the hula hoop vertically on the ground, the height of the hula hoop near the belly button.
The larger the diameter of the hula hoop, the easier it is to learn. For beginners, try to use a larger hula hoop, which can make you spin more slowly.
The diameter of an adult’s hula hoop is between 90-100 cm.
How to choose the correct weight of the hula hoop?
It would help if you chose the hula hoop with the most suitable weight according to your situation.
Although a heavier hula hoop can increase muscle tone and has a better fat removal effect, do not choose a hula hoop that is too heavy for a beginner.
Generally, the weight chosen by adults is about 500 grams, preferably no more than 900 grams.
A hula hoop of about 500 grams can give the body time to build muscle memory and endurance, thereby significantly reducing the chance of bruising and soreness.
When you practice to a certain level, and your core muscles are stronger, you can consider switching to a heavier hula hoop, but you must proceed gradually.
Besides, some innovative hula hoops are currently at Amazon, such as thisSmart Hula Hoop that never falls on the waist. This greatly reduces the difficulty of learning how to hula hoop to focus on exercise to lose weight. Any beginner can master it quickly, and you can do other things while exercising. Since it is designed like a track, it turns very smoothly.
With this necessary equipment, you will be more confident to learn how to hula hoop.
4. Precautions Before Learning How to Hula Hoop
Before learning how to hula hoop, please pay attention to the following things, which will help you get twice the result with half the effort.
Rotate slowly and at a constant speed
Do not do hula hoop exercise too fast. It will increase the burden on the waist muscles. There is a risk of muscle strain and acute intestinal volvulus. Spinning the hula hoop too quickly is not as effective as spinning the abdomen at a constant speed.
The hula hoop should not be too heavy
The heavier the hula hoop, the more significant the impact. When you think that “the whole body is sore and the exercise is effective”, you may have suffered “internal injury”.
Maintain reasonable exercise time
In terms of time, each time you do a hula hoop thin waist exercise should not exceed 20 minutes. If you exercise for too long one time, it may make the fatigued athlete unable to maintain the correct posture, leading to injury.
We recommend exercising several times a day, and the total daily exercise time should not exceed one and a half hours.
Be persistent
Only if you can keep doing exercise every day can you achieve the perfect waist curve. If you go crazy with the hula hoop for two or three hours today, but you are lazy and don’t exercise tomorrow. No matter how good the exercises are, there will be no effect. Being patient will help you better learn how to hula hoop.
Avoid the menstrual period
In the middle and late stages of menstruation, luteal cysts may appear on the periphery of the ovaries. Because the cysts are fragile, if the abdomen is squeezed vigorously, the cysts will rupture, and the accompanying internal bleeding may be fatal.
If you have particular physical problems, please practice carefully
People with low back problems, or people who are getting older, suffering from osteoporosis, and those with high blood pressure or heart disease, choose this exercise carefully. If you have a back injury, chronic back pain, or chronic illness, please consult a doctor or physical therapist before trying a hula hoop to ensure safety.
5. How to practice hula hoop？
Hula hoop exercise is an excellent aerobic exercise. To get the benefits of hula hoop exercise, please learn the correct practice method and proper posture.
How to perform hula hoop exercise correctly, please make sure to follow the following principles and steps:
1) Start with a shorter period of exercise.
Start with a shorter period of exercise and plan two to three 10-minute exercises every day.
Spinning the hula hoop with the waist for a long time makes it easy to wear the waist. The waist will hurt more and more, so at the beginning, everyone should control the time.
With the improvement of physical condition, the improvement of various abilities can gradually increase the time of each exercise.
2) The correct posture helps you learn how to hula hoop better.
Make sure that you place your feet correctly. The distance between your feet is a little wider than the shoulder width, and one foot is slightly in front of the other.
Make sure your back is straight and control your core muscles. Don’t bend your waist.
Wrap the hula hoop around your waist and lean against your back, grasping the sides of the hula hoop.
3) Start spinning the hula hoop.
When the hula hoop starts to rotate, move the waist in a circular motion to keep the hula hoop spinning.
When the hula hoop moves on the stomach, push the hips forward slightly, and when the hula hoop moves on the back, make it back.
Beginners don’t need to move or change patterns. They should spin them evenly.
4) How to challenge advanced hula hoop exercise
When you practice hula hoop for a long time, you will feel very simple. Then you may want to add some difficulty to your exercise.
You can put two hula hoops on your waist at the same time and spin them up. It will test your athletic strength even more.
If you want to increase the number of hula hoops, please choose a lightweight hula hoop. This has minor wear on the waist and is more suitable for the double-layer stacking method.
5) Maintenance of hula hoop
The hula hoop can also be regarded as portable sports equipment. The place where you usually put your hula hoop should not be too humid and dark. Some hula hoops have part of the iron inside. If they are placed in a humid place, they may rust. Please put the hula hoop in a room at room temperature and choose a suitable corner at will.
6. Conclusion
Hula hoop exercise is a good exercise, simple and easy to operate, it can bring us various health benefits, exercise core muscles well, and improve balance.
More importantly, “spinning” the hula hoop is an enjoyable and interesting thing. Interesting things always make us more motivated to persist. And “Persistence” will make you more successful.
Anyone can learn how to hula hoop. This is not very difficult, so pick up your hula hoop and exercise happily!
The above are my views on how to hula hoop. I hope my article is helpful to you.
Welding is indeed a very useful skill. Learning welding skills is also very interesting! This is true. You will know later. If you know the soldering skills, you can almost do a lot of work on soldering electronic components, which is really cool!
There is a lot of information on how to use a soldering iron on the Internet, but this time we choose to introduce you to how to use a soldering iron more interestingly.
Combined with the hand-drawn schematic diagram, I believe it can make this learning process easier and more interesting.
Before formally introducing how to use a soldering iron, let’s first understand the tools used in soldering and the simple soldering principles and methods.
Basic Knowledge And Preparation Of Soldering With Electric Soldering Iron
The picture above is a typical electric soldering iron tool, and its tip has enough heat to melt the metal welding material. Its temperature range is about 180~500℃/356~932℉!
Safety Tip #1/3: If you accidentally touch the end of the soldering iron, please let go! To avoid injury. Also, you’d better prepare a welding goggle.
The coil in the picture is soldering material, generally made of tin metal or lead metal.
The hollow tube of the welding material marked by the arrow is filled with rosin (this material is similar to the substance that increases the violin bow’s viscosity).
We use an electric soldering iron to melt the soldering material to connect the circuit components. When the welding material is heated, its temperature rises, the rosin inside immediately melts, and the welding material’s metal also melts.
When the rosin flows to the location you want to weld, clean the metal to complete a good weld.
The best electronic soldering material comprises rosin as the core, 60% tin and 40% lead. Among them, rosin is also used as a flux.
There are some other types of soldering materials, such as lead-free solder, but they contain other toxic chemicals inside, and it is not very convenient to use with an electric soldering iron.
It will also quickly erode the head of your soldering iron. If you can only find this lead-free solder, that’s okay, but please don’t breathe the bad fumes from it.
If you don’t wash your hands after soldering, the lead metal in the soldering material may enter your body, and if it accumulates for a long time, it may remain in your brain.
If too much lead metal accumulates in the human body, you may get sick at that time and cause a sadder story…
To prevent such a story from happening, please remember to wash your hands in time after completing the welding work.
Safety Tip #2/3: Lead metal is toxic. When you are soldering, your skin will inevitably come into contact with lead, so after you finish soldering, please wash your hands.
Electronic circuits are made up of electronic components connected.
To make the circuit work correctly, we need to connect everything connected correctly and don’t connect everything that shouldn’t be connected.
There are many ways to connect electronic components correctly, but the easiest way may be to use a printed circuit board (referred to as PCB soldering or “board”).
The printed circuit board makes soldering easy because it has many pads for electronic components.
If you look closely at the printed circuit board, you will see the lines connecting the pads, and these lines become lines.
All electronic components have exposed wire ends, and all wire ends, regardless of their shape, are called leads (LEADS), and they are used as part of the guiding element.
Most of the pads will have a hole in the middle, and the circuit connection is through the leads and soldering.
If you put the leads of all components into the pads belonging to each component, and you have placed them in the correct direction and successfully soldered (please note that some components may be placed in the wrong direction).
Then, the circuit can operate normally! This is because the circuit board connects the connected components correctly.
Take The Welding Of The Simplest Resistance Element As An Example
So how to use a soldering iron? I believe you can’t wait to know! Next, let us do the first welding together!
Let’s start with a resistor. The resistor has two leads (it’s not like a diode, which has a positive pole and a negative pole), and we can put it into the pad in any direction.
Printed circuit boards usually have marks indicating where each component should be placed.
If you need to consider the defense line of the component, there are corresponding instructions on the circuit board.
Because the word for resistance starts with “R”, the printed circuit board will be marked with an “R” where the resistor is placed, followed by the number of the resistor, such as “R3”.
So before you solder the resistor correctly, you need to find the resistor with the correct resistance according to your corresponding documents (such as your project file).
Then bend the resistor leads to a width that can fit in, as shown in the figure above, and then pass the two leads of the resistor through the two pads on the board.
Insert the lead into the pad until the component is correctly placed on the printed circuit board.
Sometimes you need to gently twist or pull the leads exposed at the bottom of the printed circuit board.
For most printed circuit boards, all components must be placed on the printed side (here we call it the upper end of the board), and then we have to solder all the pads on the bottom of the board.
You need to turn the printed circuit board over to solder the two pads. When you flip over the board, you need to support the resistor with your fingers to prevent it from falling out of the board.
Next, bend the resistor’s leads to the outside to 45° so that the components will not fall off during soldering.
How To Clean The Soldering Iron?
As mentioned earlier, the electric soldering iron is enough to melt the metal after heating. This means that the end of the soldering iron will quickly oxidize after being overheated.
which means that it will become dirty due to oxidation when exposed to the air.
In this article on how to use a soldering iron, you need to understand that the soldering iron’s maintenance is also essential.
Oxide is heat-insulating, so to better conduct heat and improve your welding efficiency, you need to remove the oxide on the head of the soldering iron before each welding.
This is why we need a wet sponge: to remove the oxide on the soldering iron head, place the soldering iron head on the wet sponge and scrape it lightly, then rotate the soldering iron and repeat cleaning.
In this way, the head of the soldering iron will be completely new and ready for soldering.
Please remember to clean the soldering iron tip like this before each soldering because it oxidizes very quickly. Only when the tip of the soldering iron is cleaned can you better solder.
Started To Use Electric Soldering Iron For Welding
Now it’s time for formal welding! Hold the soldering iron in one hand as if holding a pencil, and hold the soldering material in the other hand.
Use a clean soldering iron tip to simultaneously touch the pad and the wire of the component you want to solder. Please leave it in that position for one second to allow it to heat up smoothly.
Then add 1MM-3MM solder under the head of the soldering iron, do not add it above the tip of the soldering iron because then the melted solder will only fall on the tip of the soldering iron, which is useless.
We want to allow the solder to flow smoothly around the pads and wires to complete successful soldering.
The soldering material that does not touch the tip of the soldering iron will not melt. Once it touches the tip of the soldering iron, it will melt immediately. When you observe that the soldering is appropriate, remove the solder.
This is a very critical step in how to use a soldering iron.
Keep the soldering iron head on the pad and leads for another 1 second because the soldering material needs time to flow around the pad and lead, and it will only flow when it is hot enough.
Then remove the soldering iron and take a look at your perfect soldering! It’s easy.
Please note that the welding material will cool and harden quickly, which takes about 1 second. Then you can proceed to the next position welding.
When the tin and lead soldering materials melt, the smoke you see is produced by rosin evaporation. The chemicals in this smoke are not good for your health.
Please try not to inhale it. When welding, you can gently blow the weld to prevent inhalation of these fumes.
If you are using lead-free soldering materials, the smoke produced is terrible. When using it, you need to ensure that it is deep in a ventilated room and avoid inhaling smoke when you are soldering.
When you are not using the soldering iron, please put it back on the Soldering Iron Holder. This holder can make the soldering iron you put on the table safe enough. After all, it is not fun to put it directly on the table or your lap…
How To Judge Whether The Soldering Of Electronic Components Is Qualified?
How to use a soldering iron to complete successful soldering? So, how do we judge this welding is successful?
You can judge successful soldering based on the solder material that covers the pad and covers the lead. From the appearance point of view, the molten solder presents a small convex shape.
If you can see any uncovered holes or the molten solder’s shape on the board is flat. This means that you may not add enough solder, which may cause the circuit connection need not be formed.
If this happens, don’t worry. You need to repeat the soldering steps: after cleaning the soldering iron tip, touch the soldering iron tip to the pad and the lead for 1 second, and add 1mm-3mm solder, remove the solder, keep the soldering iron tip, the pad, and the lead in contact for another 1 second, and then remove the soldering iron, this may be able to repair the defective solder smoothly.
There is also a situation: you may add too much solder, which causes the solder joints on the pad to be too large and touch other pads, which may suggest connections that should not be there.
If you are not yet familiar with how to use a soldering iron, this situation may often happen.
If this happens, don’t worry too much. You only need to clean the soldering iron tip, place the soldering iron tip in the high-temperature state between the two pads for 1 second, and then slam the board on your workbench so that the molten excess solder is thrown onto the workbench.
Reminder: During the above series of operations, please check again that you have put on your welding goggles.
You need to control the amount of soldering material reasonably. It is feasible to use more or less solder. But it cannot be too much or too little.
For specific reasons, please refer to the previous content. Several final shapes shown in the figure above are all feasible.
Some people like to place many electronic components on the printed circuit board in advance and then solder them together.
The more conservative way is to add only one component on the printed circuit board and immediately complete this component’s soldering because this can eliminate the interference of other excessive leads.
It will be easier when using an electric soldering iron.
Besides, if too many electronic components are placed on the board at one time, soldering errors may occur, and the wrong pads are selected.
Of course, for those who are already proficient in how to use a soldering iron to solder, adding and placing multiple electronic components in advance may improve the efficiency of soldering.
How To Cut The Excess Leads After Welding? Why Cut These Extra Leads?
After soldering all the electronic components’ leads, it is time to cut off the excess leads. This ensures that the excess leads will not bend and cause short circuits in other leads or pads.
If this happens, it will form a connection we don’t want.
We can use a small wire cutter to cut the lead. One side of the wire cutter has a flat cutting edge, and the other side has a deep groove.
Place the flat cutting edge down, parallel to the circuit board, on top of the small solder joint. Squeeze the handle, and the lead will be cut.
Safety Tip #3/3: Every time you cut the lead, be sure to hold the lead to be cut with one hand and use the wire cutter with the other hand to cut the lead. The cut lead may be ejected. Please be careful not to get hit in your eyes. Wearing goggles is necessary.
If the excess lead is too short to be held, and it is long enough to cause a short circuit on the circuit board, in this case, cover the lead with your fingers, and then cut the excess lead with wire cutters.
Because the lead will be ejected in the process of being cut, in case the ejected wire will hit yourself or others. If you keep this practice, it will be safer.
Some leads are already very short, such as IC sockets, and there is no need to trim the leads at this time. These leads are too short and will not cause a short circuit due to bending.
Some wires are already very short, such as IC sockets, and there is no need to trim the wires at this time. This wire is too short and will not cause a short circuit due to bending.
If you make a mistake, it doesn’t matter. All welding errors can be corrected (although some are easy and some are difficult). Making mistakes allows us to learn better how to use a soldering iron to complete successful soldering.
Although soldering is easy, removing soldering requires a lot of practice. Therefore, if you make a mistake, you should have more practice opportunities.
When you have done many soldering practices, you will summarize more tips on how to use a soldering iron to solder. At that time, you are ready to weld anything!
If you like soldering and want to do better, you may want to buy some useful tools. But you don’t need to spend too much money to get them.
You may need to buy a suitable soldering iron with an electronic temperature display for about $25-50.
At the same time, you may also need a soldering iron stand that can hold the soldering iron and wet sponges. Of course, this item is not expensive.
Earwax is called cerumen in medicine. Usually, earwax is a kind of light yellow, wax-like debris, and some earwax is oily or relatively hard and large.
What causes ear wax? what is earwax made of？
It turns out that there is a section of skin (l/3 cartilage section outside the external auditory canal) of the ear and eye, which is different from the skin of other parts of the body.
There is a variant of sweat glands called cerumen glands, whose structure is somewhat similar to that of skin. The skin of the external auditory canal, like other skins, also has a sebaceous gland that secretes a type of oil.
These secretions in the cerumen glands are discharged from time to time through the opening. At first, the secretions just vomited from the cerumen glands looked a bit like melted wax. They mixed with the oil discharged by the sebaceous glands to form a thin layer attached to the skin’s surface.
This primitive earwax is twisted together with the dust in the ear canal and the peeled skin debris. After drying, they become small pieces of light yellow loose flakes piled up in the ear canal.
What are the benefits of earwax for our body?
When most people hear earwax, they always feel that it is a metabolite secreted by the human body, which has no effect on the human body and needs to be cleaned in time.
But in fact, the existence of earwax has a specific protective effect on the ears.
Protect the eardrum. The earwax can prevent sand and water droplets from directly irritating or damaging the eardrum, equivalent to an extra layer of protection. It will also resist the humid environment and form a protective layer of oil on our ear canal skin.
Antibacterial and antiviral. Specific components in earwax, such as lysobacterium, immunoglobulin, etc. It can inhibit and eliminate bacteria or viruses to a certain extent.
Reduce noise. Our eardrums are very thin and fragile and are quickly shattered by strong sound waves. At this time, earwax can act as a buffer for sound waves.
Self-cleaning effect. Without human intervention, earwax itself has a self-cleaning effect. Most earwax can be discharged from the ears by itself, just like when we are talking, eating, chewing, and swallowing, we all drive the lower jaw to move, which can help the earwax be transported out of the ears.
Although there are many earwax benefits, if it is secreted too much and not treated in time, it is easy to block the external auditory canal and affect hearing. Moreover, earwax is easy to swell with water, compressing the ear canal and reducing hearing.
What causes too much earwax?
Cerumen embolism. Cerumen embolism in the ear will cause the earwax to increase in quantity and gradually become clumpy and hard. If not treated in time, it will block the ears and cause inflammation, which will affect hearing.
Chronic hyperemia of the skin of the external auditory meatus. The increase of blood content in the external auditory canal easily stimulates the secretion of earwax in the external auditory canal, resulting in increased earwax affecting hearing and even tinnitus.
Otitis media. If the ear is inflamed, it will cause more earwax, and it will be easy to drain. At this time, go to the hospital for treatment in time to avoid affecting your hearing.
Throat problems. Because the throat and ear nerves are connected, if the disease appears in the throat, it is easy to cause ear infections and cause more earwax if the illness occurs.
Do I need to clean earwax frequently?
Earwax does not require us to clean frequently. Under normal circumstances, about one-third of the earwax will be discharged from the ear. The remaining small part of the earwax will not accumulate in a large amount, blocking our ear canal and affecting our hearing.
Of course, a small number of people will also appear when earwax becomes a lump, forming a cerumen embolism, and you need to take it out in time. However, it is not recommended that we go to the ears.
For the sake of our ear health, we should go to the hospital to find a professional doctor to clean up the earwax. We don’t recommend using ear sticks, ear picks, and other tools to clean the earwax.
How to clean earwax?
A healthy ear canal itself has a self-cleaning function. There is no need to clean it frequently. The scientific name of earwax is “cerumen”, a pale yellow viscous liquid secreted by the cerumen glands on the cartilage of the external auditory canal.
Cerumen can block the dirt that enters the external auditory canal from the outside, stick dust and small insects to protect the eardrum; simultaneously, it covers the surface of the ear canal skin to keep the skin moisture.
Cleaning your ears can easily cause damage to the ear canal. If the method is improper, it will push the earwax deep, block the ear canal, and affect hearing; if excessive force is used when digging, it will damage the skin of the external auditory canal.
Even the eardrum and bacteria will invade the opportunity to form otitis externa; if the tympanic membrane is removed, the tympanic membrane perforates and bleeding, Will feel very painful.
In most cases, earwax will slowly move from the inside of the ear canal to the ear canal’s opening, dry in the air, and form a yellow flake.
Through the mandibular joint movement during chewing, it will continue to fall out of the ear, and there is no problem of blocking the ear canal at all. It will affect hearing due to excessive earwax.
What should you do if you really want to clean your ear wax?
Trouble cleaning your ear? Is something itching, but you can’t seem to get it? That’s a sign that you should check your ear out… but what if you had the tools to check it out yourself?
Picking your ear with your fingers or a cotton swab has a high risk of damaging your ear, especially because you can’t see what you’re doing.With the Safety Visual Ear Cleaning Endoscope, you eliminate the risk!
With its HD Visual mini camera, you will clearly see what’s going on inside your ear (via mobile devices).
WHY DO YOU NEED IT?
Remove the risk of hurting your ear while cleaning.
With your phone or iPad, you can clean your earwax safely.
It’s a more efficient and thorough way to clean your ear.
Before we introduce how to clean a humidifier, You may also be interested in these common humidifier questions.
If you just want to know the specific steps of how to clean a humidifier, please go directly to Part 2.
Part 1 – Before understanding how to clean a humidifier, look at these common questions about humidifiers.
Q 1: What impact will the improper use of the humidifier have on human health?
A: The humidifier is misused, mainly because it is not cleaned and disinfected regularly, tap water is directly added to the humidifier, or the humidifier is operated for a long time.
If the humidifier is cleaned irregularly, the fungus and other microorganisms hid in the humidifier will enter the room with the water mist. The human body will inhale these microorganisms and cause respiratory diseases.
Do not add tap water to the humidifier because tap water contains various minerals, which will damage the humidifier’s evaporator.
The chlorine atoms and microorganisms in the tap water may be blown into the air with the water mist to cause air pollution and cause airway allergies or respiratory infections.
We suggest that pure water, distilled water should be added to the humidifier, or tap water should be boiled and cooled.
Q2: Can I use the humidifier for a long time at once?
A: The time we use the humidifier does not mean that the longer, the better. When the indoor humidity is too high, the amount of pineal hormone in the human body is also large.
The concentration of thyroid and adrenaline in the body is relatively low, and the human body will appear listless and malaise.
We suggest that the humidifier be stopped for a period of time after two hours of continuous operation and allow indoor air to circulate.
Q3: What is the appropriate indoor humidity? Is it different for different groups of people?
A: The best indoor humidity varies with temperature. In winter, the indoor temperature is maintained at 18 degrees Celsius to 25 degrees Celsius, and the relative humidity is 30% to 80% RH.
The temperature is controlled at 23 degrees Celsius to 28 degrees Celsius in summer, and the humidity is 30% to 60%RH.
For families with babies, the most suitable temperature is about 20 degrees Celsius, and the relative humidity is 50%~60%RH.
The human body will feel more comfortable living in this environment, and the public can equip a hygrometer at home to assist in monitoring.
Also, people suffering from joint diseases should be aware that the humid environment simulated by the humidifier may cause joint discomfort.
They recommend that they refer to the reference interval of indoor temperature and humidity values and control and adjust according to the high-temperature limit and the low humidity limit.
Q4: What is the necessity of cleaning the humidifier? How often should the humidifier be cleaned?
A: After a period of use, the humidifier’s water tank is where dirt and dirt are contained. If it is not cleaned in time, it is easy to breed bacteria. Dust in the air can also easily enter the water tank and quickly form a bacterial film.
If the water tank is not cleaned thoroughly, these bacteria will come into the air with the humidifier’s spray, causing secondary pollution.
Under normal circumstances, many people will directly add tap water to the humidifier. The tap water contains minerals. Over time, these minerals can block the humidifier and affect its function.
Cold mist humidifiers usually have a built-in filter device to filter out these minerals. Still, minerals cannot be completely filtered after all, especially when you forget to replace the filter regularly.
Therefore, when the humidifier is running, these minerals will also diffuse into the air, which is not particularly good for the lungs. Also, these minerals promote the growth of bacteria in the machine.
The humidifier should be thoroughly cleaned at least once a week. Of course, it is better to clean the humidifier once every three days. Besides, you need to replace it with new water every day (if possible, distilled water or demineralized water is recommended.).
Q5: How to clean a humidifier in the home to sterilize (Simple overview, detailed steps see Part 3)?
A: You can use a special humidifier cleaning fluid to clean or use a soft brush dipped in white vinegar to wipe and clean. Vinegar has a certain effect on sterilization and scale removal.
But after wiping, rinse with clean water several times to avoid a large amount of white vinegar remaining in the humidifier, as the aerosol is inhaled by the human body, irritating the respiratory tract.
Q6: Can I expose the humidifier to the sun and sterilize it with ultraviolet light?
A: Sun exposure can easily accelerate the aging of humidifier components. Moreover, ultraviolet disinfection can only target pathogens on the object’s surface and cannot disinfect places that are not exposed to ultraviolet rays.
Q7: In addition to humidifiers, what other methods can humidify the room?
A: There are many alternative methods, such as wiping the floor twice a day with a damp cloth, putting a few pots of water at home to evaporate naturally, drying wet clothes and towels indoors, or putting a few pots of green plants indoors. However, these methods also require scientific operations.
For example, the water used for natural evaporation should be changed once a day; the use of fragrances should be reduced during the washing process of wet clothes to prevent them from being emitted into the air to irritate the respiratory system.
At night, do not put too many green plants indoors to avoid Carbon dioxide released by plants accumulates indoors. In fact, if the humidifier can be used scientifically, the overall advantages outweigh the disadvantages.
The above are common questions about humidifiers.
Next, let’s talk about how to clean a humidifier.
Part 2 – How to Clean a Humidifier
How to Clean a Humidifier-1:
Scale cleaning in the sink of the humidifier base
1. Before cleaning the humidifier, turn off the power of the humidifier and unplug it. Before removing the water tank, you need to pour out the water stored in the water tank.
Otherwise, the water will easily flow into the humidifier and damage the parts.
2. After the humidifier is used for a period of time, the scale will form inside. Use a special humidifier descaling agent (or use white vinegar and water to mix it in a 1:1 ratio to make a cleaner, white vinegar is a natural cleaner).
Pour into the water storage tank of the humidifier base, soak for 15 minutes to fully dissolve the scale, and then use a soft brush (or use a discarded soft toothbrush to advocate environmental protection gently) to clean around the water storage tank and scrub the humidifier sink Internal scale.
3. Clean the water level sensor with a soft brush, and be sure to clean the scale. If it is not cleaned, it may cause blockage and affect the normal operation of the humidifier.
4. Pour out the descaling agent solution in the humidifier base sink and clean the sink with clean water. Do not let water splash into the air outlet. Pour out the clean water after cleaning.
How to Clean a Humidifier-2:
Cleaning the internal parts of the humidifier
1. Cleaning the pure-type humidifier is relatively simple, mainly to clean the humidifier’s inside and regularly replace the filter and evaporator. The operation is in place in one step.
2. Before replacing the filter and evaporator, you need to turn off the humidifier’s power and then unplug the socket.
3. For cleaning the ultrasonic humidifier, you need to pay attention to cleaning the water tank. The water needs to be replaced at least once a week. If the scale is not cleaned in time, the humidifier will be blocked. If it is serious, the humidifier will malfunction and cause losses.
4. When cleaning the water tank, if the size of the water inlet is large, you can reach for cleaning, use a soft cloth dampened with detergent or a detergent especially distributed by the manufacturer to clean up, after cleaning, block the water inlet by hand, Shake it lightly several times, pour out the water and the scale inside the water tank.
5. If the humidifier’s inside is dirty, it can be cleaned with a soft cloth. The whole machine cannot be put into water or rinsed with water, and it cannot be wiped with kerosene or alcohol to avoid damage to the parts.
6. Whether it is cleaning the inside of the water tank or wiping the outside of the humidifier, do not use a hard brush or other hard objects to scrub, but need to use a soft cloth or soft brush to clean.
Otherwise, it will cause damage to the body and cause the machine to fail to operate normally.
The above is how to clean a humidifier, we hope it will help you.
Part 3 – Precautions for using a humidifier
In addition to knowing how to clean a humidifier, we should also know some maintenance items for the humidifier.
1. For the first use, it should be placed at room temperature for half an hour before turning on the machine.
2. The operating environment temperature is 10-40 degrees.
3. Use clean water with a temperature lower than 40 degrees.
4. Keep away from other home appliances when the machine is working.
5. Do not add non-professional production lines or supervised disinfectants in the water.
6. Do not place the humidifier on hollow objects to avoid common frequency resonance noise.
7. Do not start the humidifier in an anhydrous state. The ultrasonic humidifier uses a transducer to convert electrical energy into mechanical energy and oscillates the water directly into ultrafine particles ≤5 microns through an oscillating circuit that generates 1.7 million high-frequency oscillations per second.
And then diffuses water molecules to the surroundings through a wind-driven device in the air. The surface of the transducer is prone to scale when it is working.
If it is not regularly maintained and cleaned, the transducer load will increase when working, indicating that it cannot work normally.
It is recommended to use distilled water and purified water to extend the humidifier’s service life effectively.
8. Try not to add any additives to the humidifier water tank: this is harmful to the humidifier’s long-term use and harms human health. Safety and health are the most important thing.
Part 4 – Replace a New Humidifier
Under normal circumstances, a high-quality humidifier can be used for at least two years or even longer under the premise of normal maintenance.
If you think how to clean a humidifier is difficult or troublesome for you, you can also directly buy a new humidifier. The New Year of 2021 is coming. Buying a new humidifier to decorate your room also heralds the beginning of the new year, full of beautiful symbols.
HahaGet Team has selected several exquisite-looking and powerful humidifiers for you. If you need it, choose your favorite humidifier. It is good to use it yourself or give it to your family members and friends as a New Year gift.
Connect the Hercules blocks while keeping the Hercules balanced, and that can boost children’s fine motor skills, hand-eye coordination, problem-solving skills, and independent thinking.
Balance forces and logical thinking collide in the process of playing the Game Of Stacking Blocks. Unconsciously develop the child’s various abilities.
✅Cognitive Thinking
✅Develop Children’s Intelligence
✅ Geometric Recognition Capability
✅Hand-Eye Coordination
✅Develop Creativity
✅Build Focus And Determination
Develop children’s five abilities
Balance contest, intellectual challenge
The combination of balance and logical thinking enables children to unknowingly improve various abilities while playing the game of stacking blocks.
Interact And Compete With Your Children
See Whose Is Taller And Better！
The Game Of Stacking Blocks can mobilize your child’s left and right brains to explore higher and more stable stacking methods together. Finally, enjoy the joy of victory.
The Stacking Game is full of creativity.
Let children grow more imagination. The game of stacking blocks can always be combined into various interesting shapes in the hands of children. Fully release the children’s imagination space, stimulate children more imagination. You can use these toys to design various games with your children, teach your children how to create the Leaning Tower of Pisa, pyramids, arch bridges, walls, etc. Then let your children try to create more interesting shapes.
Parent-Child Interaction
Have Fun Together!
Play the stacking game with your child. The more you play, the happier you will increase the relationship between your parents and your child. Don’t miss every wonderful moment of your child’s growth!
Multiple stages
Step by step difficulty
The stacking game can meet the growing needs of different age groups, allowing children to continuously challenge new difficulties and enjoy the pleasure and joy of challenging difficulties step by step.
The stacking game kits include colorful smiling Hercules, which interlock each other hand in hand, stack them while keeping them in balance, and the stacking toy will make your kids happy.
Cartoon waterproof sticker
Exercise children’s hands-on ability
The stacking game contains a variety of cartoon stickers. These stickers have cute shapes and bright colors. Let children DIY stickers on cartoon Hercules dolls, which can stimulate children’s creativity.
In addition to the stacking method
There are all kinds of unexpected ways to play.
You can use the stacking game to imagine multiple ways to play and then inspire your children to challenge so that there is no single way to play.
Strictly control the quality of materials. Give children healthy and pure love.
We strictly control the materials of the stacking game toys. These materials are non-toxic, high-quality plastics. For the customer’s experience, we almost do not count the cost. The toy features a completely safe material, 100% safe plastic pieces, and water paint without toxicity, and the toy features a suitable size.
The rounded corners of the stacking game toys are polished 360 degrees.
Better protect the child’s delicate hands.
The rounded corners are smooth, and there is no sharp chamfer, which is in line with the design of the child’s grasping hands, which is more convenient for children’s night cream.
Product Parameters
Name
The Stacking Game Hercules Toys
Packing
Color Box Packing
Applicable
Age 3+ years old
Product Accessories Include
16×Plastic Hercules dolls for Stacking +4×Sticker +2×Plastic Ball +1× Manual
Material
Plastic
Main functions
Focus On Stacking, Spatial Thinking, Imagination Creation, Hand&Eye Coordination
Packing Box Size
10.4×7.1×1.4 (Inches)
Single sticker set size
6.9×5.7 (Inches)
Hercules Doll Size ( A )
2.8×3.4×0.6 (Inches)
Hercules Doll Size ( B )
2.8×2.3×0.6 (Inches)
Note:
In principle, the stacking game Hercules toys are suitable for children over 3 years old.
You need to judge whether your child has sufficient discriminatory ability. Please prevent your babies from putting toys in their mouths when playing.
Sliding ignition is adopted for ignition (similar to the use of matches);
The body of dragon’s breath immortal lighter is very small, easy to carry, and you can even hang on the key chain;
It has excellent durability and can be used for a long time;
In terms of appearance, the dragon’s breath immortal lighter breaks the traditional design. It adopts the design of combining retro sculpture with modern metal, creating a new concept of a unique lighter.
Applicable Scenarios of dragon’s breath immortal lighter
Perfect for camping, survival, sailing, or daily use.
Product details of dragon’s breath immortal lighter
The top cover of the dragon’s breath immortal lighter
Tightly closed screw to prevent kerosene from flowing out.
Ignition rod
This ignition rod is also retro-style. It is ignited by friction and lasts for a long time.
The bottom of the lighter
The anti-slip design can effectively prevent the lighter hand from slipping off during ignition.
Usage Method
Step 1: First, fill the lighter with oil, do not spill over by adding too much oil, and then tighten the cover; (since flammable oil cannot be shipped, you need to buy kerosene for the lighter by yourself)
Step 2: Before the first ignition, you need to try to rub and slide several times to make the protective wax on the ignition rod’s head fall off.
Step 3: After the protective wax falls off, you can use the ignition stick to rub and slide to light a fire gently.
Step 4: Don’t burn the cotton core for more than 10 seconds. Please extinguish the flame when the cotton core is red.
The fire created cannot be put out by shaking the rod or blowing on it.
It can only be put out by placing the rod back into the holster.
Note:
1. Shipping flammable liquids are illegal, so these lighters are empty. But our Immortal lighter works with almost anything – lighter fluid, kerosene, ethanol, and even gasoline!
This product does not contain kerosene oil. Therefore, it would be best if you bought it yourself.
2. After using the dragon’s breath immortal lighter for a while, the internal fuel has been consumed. Please replenish fuel in time.
3.Under normal circumstances, there is a 60%-70 probability that you will ignite a match, and you can reach an 80%-90% probability when you are proficient. For people who have never used a lighter before, it is difficult to ignite at first if they do not master the strength and angle. Still, after much practice, the average person can reach a 50% probability of igniting.
4.The dragon’s breath immortal lighter is fired by striking flint and the match stick’s front end to produce friction and sparks to ignite the cotton core. It requires gasoline or kerosene. However, the amount of fuel used is minimal.
Other considerations:
1. Please put the dragon’s breath immortal lighter in a dry place to avoid moisture;
2. Please put the lighter out of children’s reach to avoid accidents;
3. When using a lighter, do not approach your face;
4. Do not place the dragon’s breath immortal lighter in a high-temperature place to avoid deflagration.
Cervical pain is now a lot of young people including the elderly have a kind of disease, there are a lot of people to work and study at ordinary times is need long-term sedentary, especially for some big cities, need sitting in front of the computer every day, and there is no proper exercise, so it is more likely to cause the cervical spondylosis. Cervical spondylosis is actually a kind of disease that is difficult to treat. However, some people think that cervical pain can be cured by sleeping without a pillow. Is this really the case?
The people that have cervical pain problems can always be perplexed. After all, should we use a pillow, or what kind of pillow can relieve cervical pain? In fact, there is no accurate conclusion on this issue because everyone’s cervical pain problem is different, and everyone’s personal feelings are not the same. Many people are curious about whether sleeping without a pillow is perfect. In this article, we will discuss whether this is true.
Sleeping without a pillow cures your cervical pain?
The answer is that people with cervical pain should sleep with pillows. Because people have certain physiological curvature of the cervical vertebra, so when we sleep, we need to have a thing to support the cervical vertebra. Otherwise, it will be exhausted after a night of cervical vertebra, so whether people with cervical pain or people without cervical pain, all should sleep with a pillow.
But it’s important to note that the sleep pillow shouldn’t be too high and cannot be too low, about the appearance of 8 ~ 10 cm is ok. As long as you choose the right height and use the pillow, you can get reasonable support for the cervical vertebra. It also makes the cervical spondylosis gradually alleviated.
If neck pain patients without a pillow, it can let sleep cannot balance in a state of relaxation. When people sleep, they must be relaxed or body tight, affecting their sleep quality and affecting the second day’s work and study.
Sleeping with a pillow will let the body breathe the overall downward, helping people more smooth breathing. And people sleep with a pillow will make people breathe down, that is, easy to breathe out through the nose.
But sleeping without a pillow can easily lead to upward breathing and an open mouth to sleep, which is not helpful to the respiratory system.
We can not neglect the pillow’s use, if the pillow is not useful, it will not be invented, so after the pillow this thing, we will make good use of it.
People with cervical pain should pay more attention to rest at ordinary times and try not to be too tired. Moreover, they should not bow their heads for a long time, especially not to play with the mobile phone for a long time.
Playing with a mobile phone for a long time is a significant cause of cervical pain. If you must have access to these electronic products, after a period of contact, you should rest for a period of time and then continue to work. It will be better for relieving cervical pain.
First of all, we need to understand the risks of sleeping without a pillow, representing our conclusion based on some medical knowledge. You can refer to it properly. I believe you can make your own judgment on this issue after reading this article.
1. In the past, many medical studies think that it is essential to use the pillow when sleeping because the spine of the person above the neck is slightly forward. Sleeping with a pillow can help the human body’s spine to maintain a normal radian to reduce the pressure of the cervical vertebra and prevent cervical pain.
2. If you keep sleeping without a pillow, you will find that your head is slightly tilted back when lying flat, and your head is lower, even below your heart. This will lead to your head blood not flowing smoothly back to the heart, complete the head’s blood circulation, and lead to the blood in the brain slant more. The next day after getting up, you often appear dizzy, can’t make you feel refreshed. In the long run, it is not good for your health.
3.People who sleeping without a pillow are more likely to have cervical pain problems. Because the cervical spine is the uppermost part of the human spine, it’s located inside the neck. The normal physiological curve is a smooth, slightly forward curve, and the pillow helps the human body to maintain this normal curve while sleeping.
However, without pillows, the curvature of the cervical spine will be forced to straighten, which is very easy to cause damage to the cervical spine and seriously endanger the health of the entire spine. So sleep with a pillow that fits the curvature of your neck.
It can be seen that people must sleep with a pillow, sleeping without a pillow will be harmful to health, choose a suitable pillow, to the cervical vertebra and the whole spine and the surrounding muscles are very good.
The necessity of sleeping with a pillow
1. Sleeping with a pillow is determined by the physiological structure of humans
The physiological structure of the human spine leads to two curvatures. The physiological curvature of the cervical spine is the first one. Almost all of us as adults face cervical curvature straightening, which has a lot to do with our habits.
The pillow is designed to provide support for the cervical spine, lest, in the entire life of a third of the sleeping time, the cervical spine has been suspended, and to bear the role of activity during the brain support.
Therefore, not a sleeping pillow for the human body is not good from this point of view. It will only increase the cervical vertebra’s burden, leading to an increase in the frequency and severity of cervical spondylosis. Please try not to sleep without a pillow.
Please try not to sleep without a pillow, which is good for your cervical spine. If you’re looking for a comfortable Pillow, you can consider buying an All-Round Sleep Pillow in HahaGet store.
2. In this case, you can sleep without a pillow
From physiology, Angle character had a better sleep a pillow, but you should choose your own suitable pillow. However, if cervical spondylosis occurs, the only comfortable condition for the cervical spine is sleeping without a pillow, then there is no need to care so much.
First, solve the most important problem at present, and then go to the hospital to seek a professional doctor’s help after a painful period.
So, how to choose the right pillow? Get these 3 tips!
1. The height of the pillow
The choice of pillow affects your sleep quality, so choosing the right pillow for you is crucial. If the pillow is too soft, it will block the head’s normal rotation, which is very bad for blood circulation. When you are choosing a pillow, You should choose a pillow about 9 cm high.
The pillow should not be too high or too low, which may easily cause insomnia and dreaminess. If it is too low, it will affect the cervical vertebra’s health and make the cervical vertebra unable to relax and rest thoroughly, which will easily lead to poor blood flow.
2. Softness of pillow
When you are choosing a pillow, you still must see the softness of the pillow. If the pillow is particularly soft, the scalp’s compression area will increase, which is very bad for blood circulation.
For the person’s head and cervical spine also do not have outstanding support, for the elderly friends, the too soft pillow will also lead to the process of turning over, the face accidentally buried in the pillow inside, leading to breathing affected, and even appear the situation of suffocation.
Besides, if the pillow is very soft and easy to cause the symptoms of cervical spine stiffness, many elderly friends will appear in the case of spinal lesions. Therefore, more attention should be paid to preventing spinal lesions and choosing a soft and hard appropriate pillow.
When choosing a pillow, you should choose something soft and hard. Even when the head is turning, it can also play a supporting role with the head rotation, not only can also ensure smooth breathing and relax the neck muscles and the head. How to choose the right pillow to improve the quality of sleep has perfect help.
3. Proper use of a pillow
When lying on your back, start with a pillow that covers your neck and shoulders. Make sure you don’t put pressure on your neck. Keep in mind that you should never rest your head on a pillow with only half your head-on. This can easily lead to cervical vertebra suspension.
Moreover, the pillow is relatively soft. If the wrong sleeping position, it is effortless to cause cervical pain in a short time. In the long run, the correct use of the pillow will avoid a lot of health problems.
Did that uncomfortable pillow keep you up all night? You fold it up, you turn it over, you loosen it up, but it’s never quite right, not anymore, and now you have around sleep pillow, a thick pillow shaped like a little handful of eggs, with a groove in the middle, for your head to be in the middle, very comfortable and supportive.
An instrument called the “roll up piano” has become so popular online that it is being marketed as an alternative to the piano. As we all know, the cost of a piano is relatively expensive, and the price of a roll up piano on the Internet is $50 yuan to $200, the price gap is very big. Is there much difference between the two in the effect of playing? Let HahaGet do some evaluation.
1. A contrast between the appearance of a real piano and a roll up piano
From the appearance of the structure, the piano is vertical, the shell is made of wood, generally has three pedals; The shell material of hand roll piano is generally rubber, the whole is relatively soft, need to play on a flat field, and generally only have an external extension pedal.
2. A comparison of the sound principles
The roll up piano relies on electricity to produce sound. The piano is relatively complex. The two systems, the keyboard, and the hitter interact with each other. Utilizing lever movement, the hammers finally hit the strings, so that the vibration of the strings is transmitted to the soundboard and amplified.
3. A comparison of the timbre
A roll up piano requires an external speaker or earphone so that we can hear the sound. In timbre, no matter from the strength, fullness or three-dimensional sense of hand roll piano is far less than the piano.
HahaGet‘s conclusion is the above three analysis, the real upright piano can be said to be a direct victory.
However, for the price, the roll up piano also has its own advantages. At the same time, compared with the ordinary upright piano, the roll up piano is easier to carry and can meet the needs of practicing at any time. Plugging in headphones also can prevent practice interference to others.
Therefore, in summary, the advantages of the two have been obvious, the roll up piano is not a substitute for the ordinary piano, but as a beginner can through the price of the popular roll up piano to achieve the initial results. After all, it takes a long time to stick to the piano, set a goal, and then choose a good piano for yourself.
I hope this article of HahaGet can be short and it is helpful for you to buy a roll up piano!
The kitchen is a place to create delicious food. Not only can you enjoy the beauty in the process of making delicious food, but also you can enjoy creating good and beautiful memories with your friends and relatives.
We all have some gadgets in the kitchen, although they look insignificant, they are useful. You do not need to envy the exquisite skills of professional chefs, if you can skillfully use some good kitchen tools, cooking will become a pleasure.
Creative kitchen gadgets are everywhere, even in a busy kitchen, but it doesn’t stop designers from experiencing life while being inspired. Here, HahaGet brings you some creative kitchen gadgets that are not only comfortable to look at but also reassuring to use.
Join us for a look at some of the more fun and stylish gadgets that add to the cooking experience.
This kind of drain basket can make it easier for us to wash vegetables in the kitchen, and it will not make the kitchen full of water. Before using this multifunctional drain basket, when we wash fruit, we soak it in a basin. After soaking, we directly block the fruit with our hands and pour out the water in the basin. In this way, the fruit in our basin will jump out of the basin mischievously. It’s very troublesome to pick up the bubble and wash it again. After using the multifunctional drain basket, after the fruit is soaked, just tilt the drain basket to pour out the water, then connect the water and continue to soak or directly turn on the tap to wash, and then don’t worry about the fruit falling out. This multi-functional automatic rotating drain basket adopts a double-layer design. The upper and lower layers can be used separately. First, it can be used as a dual-purpose object. The upper layer can be used as a common vegetable washing basket, and the lower layer can be used as a basin. When two objects are installed together, it is our multi-functional 360-degree automatic rotating drain basket, which can rotate 360 degrees at will. Use this multi-functional drain basket to wash vegetables and pickles. You don’t need to take a basin of pickles to soak fruit alone. After soaking, you don’t need to take another basket to hold vegetables and drain. You don’t need to worry about the water flowing everywhere in the kitchen. After we wash vegetables, fruits, and other food to be washed, sometimes it is not used immediately. We can turn the multi drain basket into such a way to cover the food to prevent dirt from falling into the food. Buy now
If your family likes fried food, such as fried chicken, French fries, fried various kinds of pasta. Then this folding frying basket will improve your efficiency. This frying basket can be stretched and folded, perfectly hanging on the edge of the pot. The hanging design makes it easy for you to master the progress of fried food. The handles on both sides can help you easily transfer food from the sink to the cooking pot and then to the plate. After the food is fried, simply lift the handle with both hands to drain the food. Of course, this basket can be used as a fruit container as well as a frying tool. It’s very convenient to combine multiple functions!Get 50% OFF
According to the needs of the dishes, you need to cut the onion into sections, flowers or shreds. But how can we cut the shallot in the shortest time to be thin and even, and cut the shallot in the same length? For young people who have just learned how to cook, having a scallion knife can save a lot of time. This kind of knife has 6 to 8 thin blades at the blade head, which can be cut vertically. It only needs a few knives to cut the shallot into even shreds; it can also be cut crosswise, which can cut the shallot into sections, and it can cut as much as it needs to make dishes. It’s also very convenient to clean the scallion knife. Rinse it with water.
This tool is made of stainless steel and is very cheap. Shop Now
What is indispensable in baking and cooking is the tableware of silica gel type. Silica gel oil brush can be said to be a kind of kitchenware that every country likes. As a kind of tableware with a comparative advantage in the production of oil brush and seasoning, it has met our use requirements in terms of performance. This product recommended by HahaGet is very easy to use! Before cooking or salting, it is perfect to put a small amount of sauce on fish or other meats with this bottle brush; this bottle brush is suitable for baking cakes, brush jams, brush honey water, barbecue, steak brush oil, fried eggs, etc. Click Here to Buy
Cats are known to be very cold animals. Cats are just cold to their owners. They can play with everything except their owners, such as thread balls, mirrors, and stuffed animals.
One netizen has a short-haired cat, which is cute in appearance and noble in the pedigree, making it the first choice for many cat lovers. But this kind of cat also has another characteristic, it is very cold, to anyone is love to ignore, most own owner is no exception. The owner of the cat took the cat home with enthusiasm, but the cat didn’t look at the owner, which made the cat owner very depressed. Cat owners have been trying to get closer to their cats, so they’ve been trying to buy them some tasty cat food, but it doesn’t work. In the end, the owner decided to give it a try and bought the cat a Playing stick.
The cat finally expressed a strong interest in the funny stick. The owner shook the funny stick from left to right. The cat owner jumped to the left and jumped to the right. Every time the cat catches the cudgel, the owner will stroke the owner with his hands, and the cat is not as resistant as before. This change makes the owner very happy, and the relationship with the cat is finally making progress. Playing, however, the owner is aware of what’s wrong with the finally, this is can play with the cat, but you don’t have to play with it all the time, oneself still have to eat, still have to work, so the owner tried to stop action, play with cat say again tomorrow, but he just stopped, he found that the cat unhappy. The friendship just established may disappear again!
Later, the owner had the wisdom to tie the stick to the cat’s back. As long as the cat looked up, it could see the feathers on the stick. But when he moved the stick, he would follow, so he could never catch the stick. So it can play on its own. This proved surprisingly effective, allowing the cat to amuse itself and its owner to go about his business. “I think your cat can play for the rest of her life,” said a netizen after reading about the incident. “be careful not to get exhausted.”
The best electronic 
